EK/DK Series

UNDERMOUNT & ROOF-INTEGRATED SPLIT REFRIGERATION UNITS

For your low-height truck bodies or through-loading trailers, Frigoblock devised a split refrigeration solution consisting of the underfloor-mounted EK condenser and the RE evaporator.

If you require temperature control in large-volume truck-trailer combinations and swap bodies, you can fully integrate the DK refrigeration unit as well as the RE evaporator into the roof of the body.

EK 13 L

  • Compact, space-saving split refrigeration unit
  • Flat evaporator only 100 to 160mm in height. Maximum through-loading clearance in load space.
  • Dual-flow evaporator 1,160 mm wide
  • Maximum payload due to light weight construction
  • Low noise due to large, low-speed fans
  • Optional 2-speed control for low noise and fast run mode
  • Low maintenance due to hard-wearing components
  • Long life
  • Environmentally compatible refrigerant R410A

EK 13

  • Compact, space-saving split refrigeration unit
  • Flat evaporator only 100 to 160mm in height. Maximum through-loading clearance in load space.
  • Dualflow evaporator 1,160mm wide
  • Maximum payload due to lightweight construction
  • Low noise due to large, low-speed fans
  • Optional 2-speed control for low noise and fast run mode
  • Low maintenance due to hard-wearing components
  • Long life
  • Environmentally compatible refrigerant R410A
  • Multi-compartment trucks optionally with 4-way heat pump control for short defrost cycles

EK 25

  • Compact, space-saving split refrigeration unit
  • Flat evaporator only 100 to 160mm in height. Maximum through-loading clearance in load space.
  • Dualflow evaporator 1,160mm wide
  • Low noise due to large, low-speed fans
  • Maximum payload due to lightweight construction
  • Optional 2-speed control for low noise and fast run mode
  • Low maintenance due to hard-wearing components
  • Long life
  • Environmentally compatible refrigerant R410A
  • Multi-compartment trucks optionally with 4-way heat pump control for short defrost cycles

EK 25 L

  • Compact, space-saving split refrigeration unit
  • Flat evaporator only 100 to 160mm in height. Maximum through-loading clearance in load space.
  • Dualflow evaporator 1160mm wide
  • Optional 2-speed control for low noise and fast run mode
  • Low noise due to large, low-speed fans
  • Low maintenance due to hard-wearing components
  • Long life
  • Environmentally compatible refrigerant R410A
  • Multi-compartment trucks optionally with 4-way heat pump control for short defrost cycles

DK 23

  • Splash-water protected split unit for undermount installation
  • Flat evaporator only 100 to 160mm in height. Maximum through-loading clearance in load space.
  • Lateral air-intake for different direction of travel
  • Maximum payload due to light weight construction
  • Dualflow evaporator 1,160mm wide
  • Compact, space-saving split refrigeration unit
  • Low noise due to large, low-speed fans
  • 2-speed control for low noise and fast run mode
  • Standard with 4-way heat-pump control for rapid defrost cycles
  • Low maintenance due to hard-wearing components
  • Environmentally compatible refrigerant R410A
  • Long life

DK 25

  • Splash-water protected split unit for undermount installation
  • Flat evaporator only 100 to 160mm in height. Maximum through-loading clearance in load space.
  • Lateral air-intake for different direction of travel
  • Maximum payload due to light weight construction
  • Dualflow evaporator 1,160mm wide
  • Compact, space-saving split refrigeration unit
  • Low noise due to large, low-speed fans
  • 2-speed control for low noise and fast run mode
  • Standard with 4-way heat-pump control for rapid defrost cycles
  • Low maintenance due to hard-wearing components
  • Environmentally compatible refrigerant R410A
  • Long life
Loading...