The right refrigeration machine for high-end distribution service, mounted to the front wall above the driver’s cab. The evaporator is completely integrated in the refrigeration machine so that double deck loading up to the front wall is possible without loss of loading height and the goods are protected from damage. Quick-release fasteners improve ease of maintenance and the refrigeration machine can be exchanged within a few minutes.

The ideal refrigeration machine for drawbar systems and semi-trailers mounted to the front wall. The cross-flow fan with only 100 mm discharge height ensures optimum volumetric airflow and high discharge velocity. The complete machine can be hinged out offering easy and full maintenance accessibility also when the truck is loaded.

Trucks with low body or through-loading trailer can be equipped with a split refrigeration machine where the condenser unit EK is underfloor mounted and the evaporator unit RE is installed in the loading space. The condenser unit DK, on the other hand, can be integrated fully into the roof and with the evaporator unit RE is ideal for large-volume truck-trailer combinations and swap bodies.

The FRIGOBLOCK types RE 11-44 cannot only be used as evaporator in the split combinations EK/DK + RE but also as additional evaporators for multi-compartment trucks. Double-deck loading or multi-compartment bodies divided longitudinally in three sections can be realised without problem due to low height of 100 mm and higher, width of 720 mm and wider.

Already in the early 1970s, FRIGOBLOCK decided on the development of the alternator drive system. Via a V-Belt from the truck engine, this system produces on-board the same voltage and frequency as the European power supply system. This means there is no problem to run FRIGOBLOCK machines on a mains supply without the need for any additional equipment